Mehta Tubes Limited

Valsad, Gujarat

GST 24AACCM9337R1ZT

TrustSeal Verified
IndiaMART Verified Exporter IndiaMART Verified Exporter

Brass Tubes

Polished Brass Tubing

Rs 550 / Kilogram

Polished Brass Tubing
  • Brand: Mehta Tubes
  • Unit Length: 3m, 6m, 12m
  • Size: 1 inch-2 inch, 1/4 inch-1 inch
  • Hallow Sections: Circular
  • Alloy: With Alloy
  • Standard: BS, ASTM, DIN, JIS, IS
  • Minimum Order Quantity: 100 Kilogram
  • Brand: Mehta Tubes
  • Unit Length: 3m, 6m, 12m
  • Size: 1 inch-2 inch, 1/4 inch-1 inch
  • Hallow Sections: Circular
  • Alloy: With Alloy
  • Standard: BS, ASTM, DIN, JIS, IS
We are leading supplier of Polished brass tubing. We manufacture a wide range of  Polished brass tubing that can be utilized in many applications at home or commercial applications.
know more

Admiralty Brass Tube

Rs 550 / Kilogram

Admiralty Brass Tube
  • Hallow Sections: Circular
  • Size: 2 inch-3 inch, 1 inch-2 inch
  • Unit Length: 12m, 15 m (max in straight), 3m, 6m
  • Thickness: 0.5 mm (min)
  • STANDARDS: DIN, IS ASTM
  • Minimum Order Quantity: 100 Kilogram
  • Hallow Sections: Circular
  • Size: 2 inch-3 inch, 1 inch-2 inch
  • Unit Length: 12m, 15 m (max in straight), 3m, 6m
  • Thickness: 0.5 mm (min)
  • Out Side Diameter: 5.0 (min) - 219 (max) mm
  • STANDARDS: DIN, IS ASTM
We are involved in offering a wide range of Admiralty Brass Tube to our most valued clients.Our range of Admiralty Brass Tube is widely appreciated by our clients which are situated all round the nation.We offer our range of Admiralty Brass Tube at most affordable prices.
know more

Brass Tubes For Furniture & Lightning Fixtures

Rs 500 / Kilogram

Brass Tubes For Furniture & Lightning Fixtures
  • Brand: Mehta Tubes
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Outer Diameter: 3.00 (min) - 219 (max) mm
  • Wall Thickness: 0.3 mm (min)
  • Length: 15 m (max in Straight)
  • Minimum Order Quantity: 100 Kilogram
  • Brand: Mehta Tubes
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Outer Diameter: 3.00 (min) - 219 (max) mm
  • Wall Thickness: 0.3 mm (min)
  • Length: 15 m (max in Straight)
Characteristics:
A Copper and Zinc Alloy containing a small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. The Severe environment must be considered to predict corrosion behaviour. The alloy is often used for a variety of deep drawn components. Also, manufactures a wide range of brass fittings.

Product application Areas:
Furniture, Architectural Grill Work
know more

Brass Rectangular Tubing

Rs 550 / Kilogram

Brass Rectangular Tubing
  • Material: Brass
  • Shape: Rectangular
  • Size: 1 inch-2 inch, 2 inch-3 inch
  • Unit Length: 3m, 6m, 12m
  • Hallow Sections: Circular
  • Minimum Order Quantity: 100 Kilogram
  • Material: Brass
  • Shape: Rectangular
  • Size: 1 inch-2 inch, 2 inch-3 inch
  • Unit Length: 3m, 6m, 12m
  • Hallow Sections: Circular
We are leading supplier of Brass rectangular tubing.
Also giving it with best quality and best price.
know more

Thin Wall Brass Tubing

Rs 550 / Kilogram

Thin Wall Brass Tubing
  • Material: Brass
  • Usage/Application: Industrial
  • Size: 1/4 inch-1 inch, 1 inch-2 inch
  • Unit Length: 12m, 3m, 6m
  • Hallow Sections: Circular
  • Brand: Mehta Tubes
  • Minimum Order Quantity: 100 Kilogram
  • Material: Brass
  • Usage/Application: Industrial
  • Size: 1/4 inch-1 inch, 1 inch-2 inch
  • Unit Length: 12m, 3m, 6m
  • Hallow Sections: Circular
  • Brand: Mehta Tubes
We are leading supplier of Thin wall Brass tubing. We manufacture a wide range of Thin Wall Brass Tubing that can be utilized in many applications at home or commercial applications. These are highly durable and resistant to rust.
know more

Brass Tubes For General Engineering Purpose

Rs 500 / Kilogram

Brass Tubes For General Engineering Purpose
  • Brand: Mehta Tubes
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Outer Diameter: 3.0 (min) - 219 mm (max)
  • Wall Thickness: 0.3 mm (min)
  • Length: 15 m (Max in Straight)
  • Minimum Order Quantity: 100 Kilogram
  • Brand: Mehta Tubes
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Outer Diameter: 3.0 (min) - 219 mm (max)
  • Wall Thickness: 0.3 mm (min)
  • Length: 15 m (Max in Straight)
Characteristics:
We offer a wide range of brass components. A Copper and Zinc Alloy containing a small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. The Severe environment must be considered to predict corrosion behaviour. The alloy is often used for a variety of deep drawn components.

Product application Areas:
General Engineering, Ammunition
know more

70/30 Brass Pipe

Rs 550 / Kilogram

70/30 Brass Pipe
  • Single Piece Length: 3 meter, 6 meter
  • Size/Diameter: 1/4 to 2.1/8 inch
  • Standard: DIN, IS ASTM STANDARDS
  • Material: Brass
  • Type: Pipe
  • Grade: 70/30
  • Minimum Order Quantity: 100 Kilogram
  • Single Piece Length: 3 meter, 6 meter
  • Size/Diameter: 1/4 to 2.1/8 inch
  • Standard: DIN, IS ASTM STANDARDS
  • Material: Brass
  • Type: Pipe
  • Grade: 70/30
We are leading supplier of 70/30 Brass, we obligated to meet the quality standards as per the customer demand.
know more

Brass Round Pipe

Rs 500 / Kilogram

Brass Round Pipe
  • Size/Diameter: 2 inch, 1 inch
  • Single Piece Length: 15 m (max in straight)
  • Wall Thickness: 0.3 mm (min)
  • Outer Diameter: 3.0 (min) - 219 (max) mm
  • Minimum Order Quantity: 100 Kilogram
  • Size/Diameter: 2 inch, 1 inch
  • Single Piece Length: 15 m (max in straight)
  • Wall Thickness: 0.3 mm (min)
  • Outer Diameter: 3.0 (min) - 219 (max) mm
  • Country of Origin: Made in India
We are leading supplier of the Brass pipe and providing best quality product with the appropriate price...
know more

Threaded Brass Pipe

Rs 550 / Kilogram

Threaded Brass Pipe
  • Material: Brass
  • Size/Diameter: 1 inch, 2 inch
  • Color: Yellow
  • Grade: 63/37
  • Country of Origin: Made in India
  • Minimum Order Quantity: 100 Kilogram
  • Material: Brass
  • Size/Diameter: 1 inch, 2 inch
  • Color: Yellow
  • Grade: 63/37
  • Country of Origin: Made in India
We are the leading supplier of the Threaded Brass pipe.
Also giving it with best quality and best price.
know more

cold rolled Brass Rod

Rs 500 / Kilogram

cold rolled Brass Rod
  • Size: 4 inch
  • Single Piece Length: 6 meter
  • Technique: Cold Rolled
  • Rod Length: 10, 15 m
  • Diameter: 10 - 125 mm
  • Shape: Circular
  • Minimum Order Quantity: 100 Kilogram
  • Size: 4 inch
  • Single Piece Length: 6 meter
  • Technique: Cold Rolled
  • Rod Length: 10, 15 m
  • Diameter: 10 - 125 mm
  • Shape: Circular
We are leading supplier of Brass Rod and providing with best quality and with best price
know more

round Brass Rods

Rs 500 / Kilogram

round Brass Rods
  • Material: Brass
  • Shape: Round
  • Diameter: 10 - 125 mm or as per drawing
  • Rod Length: 5,10,15 m
  • I Deal In: New Only
  • Thickness: 0.3 mm (min)
  • Minimum Order Quantity: 100 Kilogram
  • Material: Brass
  • Shape: Round
  • Diameter: 10 - 125 mm or as per drawing
  • Rod Length: 5,10,15 m
  • I Deal In: New Only
  • Thickness: 0.3 mm (min)
For the diverse requirements of our valued clients, we are manufacturing and exporting quality approved range of Brass Rods.

Product Application Areas:

Heat Exchangers, Refineries, Power Plants, Desalination Plants, Ship Building & Ship Repairs, Condensers, Ferrules, Distillers.
know more

Copper Sheet Plate

Ask Price

Copper Sheet Plate
  • Thickness: 0.5 - 6 mm
  • Shape: Plate
  • Alloy: Yes
  • Composition: Cu- 99.9 %
  • Country of Origin: Made in India
  • Thickness: 0.5 - 6 mm
  • Shape: Plate
  • Alloy: Yes
  • Composition: Cu- 99.9 %
  • Country of Origin: Made in India
Being one of the leading companies, we are engaged in offering a wide...
Being one of the leading companies, we are engaged in offering a wide range of Copper Sheet to meet the needs of our clients. We are capable of giving a wide variety of precision Copper Sheets, with a thickness ranging from 0. 5mm to 6. 0mm. These are widely used in transformer, water heater exchanger units
know more

Arsenic Brass Tubes For Sugar Industries

Ask Price

Arsenic Brass Tubes For Sugar Industries
  • Shape: Round
  • Size: 2 inch-3 inch, 1 inch-2 inch
  • Unit Length: 6m, 12m
  • Hollow Sections: Circular
  • Chemical: Cu, Zn, Pb, Fe
  • Shape: Round
  • Size: 2 inch-3 inch, 1 inch-2 inch
  • Unit Length: 6m, 12m
  • Hollow Sections: Circular
  • Chemical: Cu, Zn, Pb, Fe
We are leading supplier of Arsenic Brass Tubes For Sugar Industries.


Characteristics:
A Copper and Zinc Alloy containing a small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. The Severe environment must be considered to predict corrosion behaviour. The alloy is often used for a variety of deep drawn components.
Product application Areas:
General Engineering, Ammunition

Specifications:
Chemical Composition

Cu63.0 to 68.5
Znrem.
Pb0.10 max
Fe0.07 max
Related Standards

ISSIS407
CuZn37
KSC 2700
JISC 2700
ASTMC27000
BSC2108
DINCuZn37
know more

Beryllium Copper Strip

Ask Price

Beryllium Copper Strip
  • Thickness: 1mm
  • Size/Diameter: 1 inch
  • Packaging Type: Coil
  • Form: Sheet
  • Country of Origin: Made in India
  • Thickness: 1mm
  • Size/Diameter: 1 inch
  • Packaging Type: Coil
  • Form: Sheet
  • Country of Origin: Made in India
By utilizing our years of experience, we bring forth a qualitative...
By utilizing our years of experience, we bring forth a qualitative array of Beryllium Copper Strip.
Also giving it with best quality and best price.
know more

Brass Compression Fittings

Ask Price

Brass Compression Fittings
  • Application: Hydraulic Pipe, Structure Pipe, Gas Pipe
  • Size: 1/2, 3/4, 1, 1.1/4, 1.1/2 inch
  • Type: Plain, Hexagonal, Cross Knurling & Straight Knurling
  • Minimum Order Quantity: 50 Piece
  • Application: Hydraulic Pipe, Structure Pipe, Gas Pipe
  • Size: 1/2, 3/4, 1, 1.1/4, 1.1/2 inch
  • Type: Plain, Hexagonal, Cross Knurling & Straight Knurling
  • Threads: BSP & BSPT (Parallel & Taper Threads)
  • Pressure: 2000 psi
We have emerged as the leading entity, involved in offering a wide array of Brass Compression Fitting. The offered fitting is well-manufactured using optimum quality brass and progressive techniques under the guidance of our experienced professionals. The provided fitting is highly appreciated owing to its easy installation and high strength. The provided fitting is available at a nominal price in the market.


Features:
  • Easy to install
  • Durable finish standard
  • Flawless finish

Use With:
  • Copper Tube
  • Brass Tube
  • Aluminium Tube
  • Pressure: Working pressure up to 2000 psi with a 4:1 safety factor depending on tube size.
  • Temperature Range: 65° F to 250° F with metal tube
  • Brass UPVC, CPVC, PPR Inserts & Fittings
  • Designed & developed as per customer's requirement
know more

Admiralty Brass Tubes For Evaporators & Coolers

Ask Price

Admiralty Brass Tubes For Evaporators & Coolers
  • Shape: Round
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Standard: BS, ASTM, DIN, JIS, IS
  • Temperature: 2000 degree C
  • Shape: Round
  • Hallow Sections: Circular
  • I Deal In: New Only
  • Standard: BS, ASTM, DIN, JIS, IS
  • Temperature: 2000 degree C
Product Application Areas:
Heat Exchangers, Refineries, Power Plants, Desalination Plants, Ship Building & Ship Repairs, Condensers, Ferrules, Distillers.

Characteristic:
A Copper Zinc Alloy containing tin and small amount of Arsenic, which is a added as an inhibitor against dezincification. The pressure of Tin imparts to the alloy good corrosion resistance in a moderately polluted river water and clean seawater, either stagnant or slow moving (upto about 2 mtrs/sec.). The most common and wrought form is tube for heat exchange equipment. a Guide to the selection of tube material:Clear river, Lake or Canal Water.a. Dissolved salts more than 2000 ppm.b. Chloride less then 20 ppm.c. H2S and Ammonia is less than 1 ppm.d. Suspended solids less than 25 ppm.e. For temperature more than 2000C and less than 4500 C.Permissible average velocity of water 1.8-2.0 meters/sec.

Application
C44300 Admiralty Brass Tubes
Evaporators, Condensate Coolers, Heaters, Vent Condensers, Water Heaters, Generator, Air Coolers, Turbine Oil Coolers for Petrochemical, Ship-building, Power plants and Desalinations plants.

C68700 Aluminum Brass Tubes
Steam Ejector Inter and after Condensers, Gland Steam Condensers, Feed Water Evaporators for Petrochemical, Ship-building, Power plants and Desalinations plants.
know more

Brass Tubes For Sanitary Fittings

Ask Price

Brass Tubes For Sanitary Fittings
  • Usage/Application: Drinking Water
  • Shape: Cylindrical
  • Single Piece Length: 3 meter
  • Hallow Sections: Circular
  • Style: plain
  • Usage/Application: Drinking Water
  • Shape: Cylindrical
  • Single Piece Length: 3 meter
  • Hallow Sections: Circular
  • Style: plain
Characteristics:
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.

Product application Areas:
Plumbing
know more

Round Lead Brass

Ask Price

Round Lead Brass
  • Material: Brass
  • Length: 5, 6, 10, 15 m
  • Outer Diameter: 3.0 (min) - 219 m (max)
  • Thickness: 0.3 mm (min)
  • Country of Origin: Made in India
  • Material: Brass
  • Length: 5, 6, 10, 15 m
  • Outer Diameter: 3.0 (min) - 219 m (max)
  • Thickness: 0.3 mm (min)
  • Country of Origin: Made in India
We at Mehta Tubes are leading manufacturers and suppliers of Leaded Brass Rods/ Tubes/ Pipes. These products are available with us in various shape & size.
know more

Brass T Fittings

Ask Price

Brass T Fittings
  • Type: Pipe Fittings
  • Material: Stainless Steel
  • Usage/Application: Hardware Fitting
  • Size: 1/4 inch-1 inch, 1 inch-2 inch
  • Connection: Female, Male
  • Minimum Order Quantity: 50 Piece
  • Type: Pipe Fittings
  • Material: Stainless Steel
  • Usage/Application: Hardware Fitting
  • Size: 1/4 inch-1 inch, 1 inch-2 inch
  • Connection: Female, Male
We are leading supplier of Brass T Fittings. We manufacture a wide range of Brass T fittings that can be utilized in many applications at home or commercial applications. These fittings are highly durable and resistant to rust.
know more

Brass Plumbing Fittings

Ask Price

Brass Plumbing Fittings
  • Material: Brass
  • Connection: Male, Female
  • Is Alloy: No
  • Size: 1/4, 1/2 inch
  • Country of Origin: Made in India
  • Minimum Order Quantity: 50 Piece
  • Material: Brass
  • Connection: Male, Female
  • Is Alloy: No
  • Size: 1/4, 1/2 inch
  • Country of Origin: Made in India
We are leading supplier of Brass plumbing fittings. We manufacture a wide range of brass fittings that can be utilized in many applications at home or commercial applications. These fittings are highly durable and resistant to rust. It is also recyclable and hence does not harm the environment in any way. It is also very compatible for carrying water, hence, ideal for fittings in plumbing.
know more

Brass Pipe Fittings

Ask Price

Brass Pipe Fittings
  • Fitting Type: Elbow
  • Connection Type: Male
  • Size: 1 inch-2 inch, 1/8 inch, 1/4 inch-1 inch, 2 inch-3 inch
  • Connection: Female, Male
  • Application: Structure Pipe
  • Minimum Order Quantity: 50 Piece
  • Fitting Type: Elbow
  • Connection Type: Male
  • Size: 1 inch-2 inch, 1/8 inch, 1/4 inch-1 inch, 2 inch-3 inch
  • Connection: Female, Male
  • Application: Structure Pipe

We are a leader in manufacturing and exporting of Brass Pipe Fittings like Brass tee etc. Brass tee available in both male and female.

know more

Explore More Categories

x

Send us a Quick Message

country flag
x

Provide Us More Details

Purpose of Requirement:

Reselling End Use Raw Material

We recommend you to enter details of your requirement to get quick quotations.
Back

Mehta Tubes Limited