Copper Rod Size: 16- 20 mm (length as per customer specifications)
Dowell Pins Size: 10 mm, 14 mm
Solid Copper Earth Rods
Copper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high.
Swaged Earth Rods (250 Microns)
Plain Swaged Earth Rods.
Tapered Swaged Earth Rods.
Especially developed for the Australian market, available with driving head and coupling.
Driving Heads / Studs / Tips / Dowell Pins Made from High Tensile Steel to ensure force from power hammer. Dowell Pins are also made from High-Grade Brass.
We are involved in offering a wide range of VRV and VRF Copper coil to our most valued clients.Our range of VRV and VRF Copper coil is widely appreciated by our clients which are situated all round the nation.We offer our range of VRV and VRF Copper coil at most affordable prices.
Earthing is the electrical drain path for stray energy in an electrical circuit. Grounding is the most effective method of the earthing. Inserting rods, plates, or strips the ground resistance can be reduced up to 22 %. i.e. If the original ground resistance 300 ohms it can be reduced to 66 ohms. It is essential to have a resistance value of 2 ohms for sensitive electronic and electrical equipment.
In order to achieve the required resistance value of 2 ohms and below it is essential to add minerals, hygroscopic compounds, expansion compounds and diffusion compounds to the soil. 'TEREC+' is a miracle compound comprising of all the needed additives. When 10 kg of TEREC+ is induced into the soil the required resistance value of 2 ohms can be easily achieved permanently for 15 years.
'TEREC+' is the only reliable and permanent grounding solution for the safety of human, livestock, equipment, and property.
Driving Stud: These are made from steel & suitable for use with Power Hammers.
Coupling: These are made from copper alloy & counter bored to enclose threads. Coupling is high strength & also highly corrosion resistant. These are used to connect driving stud to rod or rod to rod.
Rod: Steel rod with the core of low carbon provides tensile strength at least of 600 N/mm2. These rods are molecularly bonded with 99.9 % pure electrolytic copper up to the thickness of 0.25mm, Rolled threads at each end give strength than cut threads.
Clamp: These are made from high copper content alloy strong resistance to corrosion.